层状边坡岩体滑动稳定的三维动力学分析

本文通过振动模拟试验探索了块体运动时滑面的摩擦特性，建立了块体运动的三维动力学方程，并探讨了层状边坡层间振动加速度在传递过程中加速度变化情况。从而可以计算出受振动影响时边坡各层间的稳定性。     

Structural and magnetic properties of CoxZn1−xFe2O4 nanocrystals synthesized by microwave method

Microwave assisted combustion method was used to produce nanocrystalline cobalt doped zinc ferrite, Co_xZn_1−xFe₂O₄, from stoichiometric mixture of (Co(NO₃)₂·6H₂O), (Fe(NO₃)₃·9H₂O), (Zn(NO₃)₂·6H₂O), and urea (CO(NH₂)₂) as a fuel. The structural, morphological and magnetic properties of the products were determined by X-ray powder diffractometry (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM) respectively. The average crystallite sizes obtained from XRD were between 35 and 39 nm. Magnetization measurements indicate that samples with less Co content have superparamagnetic behavior at room temperature. When the Co substitution increases the saturation magnetization due to the magnetic character of the Co cations substituting the non-magnetic Zn and coercivity also increase due to anisotropic nature of cobalt. The Co_xZn_1−xFe₂O₄ nanocrystals exhibit typical features of an assembly of magnetic particles with a distribution of blocking temperatures and indicate the spin-glass behavior.     

Determination of lead and cadmium in seawater using a vibrating silver amalgam microwire electrode

Silver amalgamated electrodes are a good substrate to determine lead (Pb) and cadmium (Cd) in seawater because they have properties similar to mercury but without the free mercury (Hg). Here a silver amalgamated microwire (SAM) electrode is optimised for the determination of Pb and Cd in coastal waters and uncontaminated ocean waters. The SAM was vibrated during the deposition step to increase the sensitivity, and electroanalytical parameters were optimised. The Hg coating required plating from a relatively concentrated (millimolar) solution, much greater (500×) than used for instance to coat glassy carbon electrodes. However, the coating on the ex situ amalgamated electrode was found to be stable and could be used for up to a week to determine trace levels of Pb in seawater of natural pH. The limit of detection square-wave ASV (50 Hz) using the pre-plated SAM electrode was 8 pM Pb using a 1-min plating time at pH 4.5. The limit of detection in pH 2 seawater was 4 pM using a 5-min plating time, and it was 12 pM using a 10-min plating time at natural pH in the presence of air, using a square-wave frequency of 700 Hz. The vibrating SAM electrode was tested on the determination of Pb in reference seawater samples from the open Atlantic (at the 20 pM level), Pacific, and used for a study of Pb in samples collected over 24 h in Liverpool Bay (Irish Sea).     

On the numerical solution of certain boundary control problems for vibrating media in one space-dimension

This paper is concerned with the numerical solution of control problems which consist of minimizing certain quadratic functionals depending on control functions in L ₂[0,1] for some given time T > 0 and bounded with respect to the maximum norm. These control functions act upon the boundary conditions of a vibrating system in one space-dimension which is governed by a wave equation of spatial order 2n They are to be chosen in such a way that a given initial state of vibration at time zero is transferred into the state of rest. This requirement can be expressed by an infinite system of moment equations to be satisfied by the control functions

The control problem is approximated by replacing this infinite system by finitely many, say N, equations (truncation) and by choosing piecewise constant functions as controls (discretization). The resulting problem is a quadratic optimization problem which is solved very efficiently by a multiplier method

Convergence of the solutions of the approximating problems to the solution of the control problem, as N tends to infinity and the discretization is infinitely refined, is shown under mild assumptions. Numerical results are presented for a vibrating beam     

New volume translation for cubic equations of state

Peneloux's volume translation is found of not equal benefit depending on pressure and temperature ranges for which volumetric properties are represented (some ranges being unfortunately worse described after correction than before).     

Comparison of double-pulse digital holography and HPFEM measurements

Pulsed digital holographic interferometry is a widely used technique for measurement of surface deformations. The results are displayed as high-quality images containing the surface deformation represented as a continuous function with high-precision and good resolution. On the theoretical side, the high precision finite-elements method (HPFEM) can be used to compute whole deformation maps of elastic continua, with a resolution comparable to that obtained with digital holographic interferometry. To prove the latter a series of resonant modes from a flat rectangular metal plate obtained with digital holographic interferometry will be compared to the same modes obtained under the same conditions with HPFEM. A very useful measurement concept is reached by combining both methods since they can be performed in parallel and within the same working area.     

小型大功率脉冲半导体激光器的激励器设计

介绍以WMOS管作开关管的小型大功率脉冲半导体激光器的激励器原理,提出模块化激励器的设计观点,并给出实例。     

Structural and magnetic properties of NiCuZn ferrite/SiO2 nanocomposites

Ni_0.53Cu_0.12Zn_0.35Fe₂O₄/SiO₂ nanocomposites with different weight percentages of NiCuZn ferrite dispersed in silica matrix were prepared by microwave-hydrothermal method using tetraethylorthosilicate as a precursor of silica, and metal nitrates as precursors of NiCuZn ferrite. The structure and morphology of the composites were studied using X-ray diffraction and scanning electron microscopy. The structural changes in these samples were characterized using Fourier Transform Infrared Spectrometer in the range of 400-1500 cm⁻¹. The bands in the range of 580-880 cm⁻¹ show a slight increase in intensity, which could be ascribed to the enhanced interactions between the NiCuZnFe₂O₄ clusters and silica matrix. The effects of silica content and sintering temperature on the magnetic properties of Ni_0.53Cu_0.12Zn_0.35Fe₂O₄/SiO₂ nanocomposites have been studied using electron spin resonance and vibrating sample magnetometer.     

Collaborative optimization of screening efficiency and screen surface load — Part I: Modeling and evaluation

The screen surface load (SSL) caused by granular materials is an important factor affecting the structural performance of vibrating screen. Based on virtual experiment, a multi-objective collaborative optimization method is proposed to control the SSL under high screening efficiency (SE) in this work. Firstly, a DEM model was established to study the influence of process parameters on SE and SSL. Secondly, the NSGA-II (Non-dominated Sorting Genetic Algorithm) was employed to optimize the screening parameters with both SE and SSL as targets. The optimization method proves to be effective implementing on a linear vibrating screening. With SE equals to 98.5%, the SSL optimizable range is 39.2%. While compromising the SE to 88.7%, the SSL optimizable range improves to 48.6%. The result shows that the collaborative optimization could effectively control the SSL while maintaining a high SE, which is of great significance to improve the service life of screen surface and screen body.     

Riesz Basis Generation of Abstract Second-Order Partial Differential Equation Systems with General Non-Separated Boundary Conditions

Riesz basis analysis for a class of general second-order partial differential equation systems with nonseparated boundary conditions is conducted. Using the modern spectral analysis approach for parameterized ordinary differential operators, it is shown that the Riesz basis property holds for the general system if its associated characteristic equation is strongly regular. The Riesz basis property can then be readily established in a unified manner for many one-dimensional second-order systems such as linear string and beam equations with collocated or noncollocated boundary feedbacks and tip mass attached systems. Three demonstrative examples are presented.